TEST 350-401 DATES - 350-401 VALID TEST COST

Test 350-401 Dates - 350-401 Valid Test Cost

Test 350-401 Dates - 350-401 Valid Test Cost

Blog Article

Tags: Test 350-401 Dates, 350-401 Valid Test Cost, 350-401 Updated Dumps, 350-401 Certification Exam Dumps, 350-401 Certificate Exam

What's more, part of that ExamBoosts 350-401 dumps now are free: https://drive.google.com/open?id=1CS9MYLluwV4Ku1KIMxOOmqYUEv12Tgoc

These Cisco 350-401 exam questions give you an idea about the final Cisco 350-401 exam questions formats, exam question structures, and best possible answers, and you will also enhance your exam time management skills. Finally, at the end of Cisco 350-401 Exam Practice test you will be ready to pass the final Cisco 350-401 exam easily. Best of luck in Cisco Cisco exam and professional career!!!

Cisco 350-401 exam is an essential certification for network professionals who want to advance their careers in the networking industry. It is a globally recognized certification that validates the knowledge and skills required to design, implement, and manage complex enterprise networks. Passing 350-401 Exam demonstrates a candidate's expertise in the latest networking technologies and their ability to use them to solve real-world problems.

>> Test 350-401 Dates <<

Get Up-to-Date Test 350-401 Dates to Pass the 350-401 Exam

To find better job opportunities you have to learn new and in-demand skills and upgrade your knowledge. With the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) 350-401 Exam you can do this job nicely and quickly. To do this you just need to get registered in the ExamBoosts Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam and put all your efforts to pass this challenging Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam with good scores. However, you should keep in mind that the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam is a valuable credential and will play an important role in your career advancement

Cisco Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample Questions (Q213-Q218):

NEW QUESTION # 213
An engineer has deployed a single Cisco 5520 WLC with a management IP address of 172.16.50.5/24. The engineer must register 50 new Cisco AIR-CAP2802I-E-K9 access points to the WLC using DHCP option 43.
The access points are connected to a switch in VLAN 100 that uses the 172.16.100.0/24 subnet. The engineer has configured the DHCP scope on the switch as follows:

The access points are failing to join the wireless LAN controller. Which action resolves the issue?

  • A. configure dns-server 172.16.100.1
  • B. configure option 43 Hex F104.CA10.3205
  • C. configure dns-server 172.16.50.5
  • D. configure option 43 Hex F104.AC10.3205

Answer: D

Explanation:
Explanation
The Option 43 hexadecimal string is assembled as a sequence of the TLV values for the Option 43 suboption:
Type + Length + Value. Type is always the suboption code 0xf1. Length is the number of controller management IP addresses times 4 in hex. Value is the IP address of the controller listed sequentially in hex.
On this question, there is 1 controller with management interface IP addresses 172.16.50.5/24. The type is
0xf1. The length is 1 * 4 = 8 = 0x04. The mgmt IP addresses 172.16.50.5 translate to ac.10.32.05 (0xac103205). When the string is assembled, it yields f108c0a80a05c0a80a14. The Cisco IOS command that is added to the DHCP scope is:
option 43 hex f104ac103205


NEW QUESTION # 214
How do the RIB and the FIB differ?

  • A. RIB is derived from the control plane, and the FIB is derived from the RIB.
  • B. FIB contains routes learned through a dynamic routing protocol, and the RIB contains routes that are static or directly connected.
  • C. RIB contains the interface for a destination, and the FIB contains the next hop information.
  • D. FIB is derived from the control plane, and the RIB is derived from the data plane.

Answer: A


NEW QUESTION # 215
Refer to me exhibit.


Refer to the exhibit. Which configuration must be implemented to establish EBGP peering between R1 and R2?

  • A. Option B
  • B. Option A
  • C. Option D
  • D. Option C

Answer: B


NEW QUESTION # 216
A network engineer must configure the VTY lines on a router to achieve these results:
* Remote access should be permitted for all feasible protocols.
* Only a password should be required for device authentication.
* All idle EXEC sessions must be terminated in 60 minutes.
Which configuration should be applied?

  • A. Option B
  • B. Option A
  • C. Option D
  • D. Option C

Answer: D

Explanation:
Option C is the correct choice because it aligns with the requirements specified in the question. The command
"line vty 0 15" starts the configuration for VTY lines, which are used for remote access. The "password Cisco123" command sets the password for device authentication. "Transport input all" allows all possible protocols for remote access, and "exec-timeout 60" ensures that any idle EXEC sessions are terminated after
60 minutes of inactivity.


NEW QUESTION # 217
Which feature Is used to propagate ARP broadcast, and link-local frames across a Cisco SD-Access fabric to address connectivity needs for silent hosts that require reception of traffic to start communicating?

  • A. Native Fabric Multicast
  • B. SOA Transit
  • C. Layer 2 Flooding
  • D. Multisite Fabric

Answer: C

Explanation:
Explanation
Layer2 FloodingCisco SD-Access fabric provides many optimizations to improve unicast traffic flow, and to reduce the unnecessary flooding of data such as broadcasts. But, for some traffic and applications, it may be desirable to enable broadcast forwarding within the fabric.
By default, this is disabled in the Cisco SD-Access architecture. If broadcast, Link local multicast and Arp flooding is required, it must be specifically enabled on a per-subnet basis using Layer 2 flooding feature.
Layer 2 flooding can be used to forward broadcasts for certain traffic and application types which may require leveraging of Layer 2 connectivity, such as silent hosts, card readers, door locks, etc.


NEW QUESTION # 218
......

The optimization of 350-401 training questions is very much in need of your opinion. If you find any problems during use, you can give us feedback. We will give you some benefits as a thank you. You will get a chance to update the system of 350-401 Real Exam for free. Of course, we really hope that you can make some good suggestions after using our 350-401 study materials. We hope to grow with you and help you get more success in your life.

350-401 Valid Test Cost: https://www.examboosts.com/Cisco/350-401-practice-exam-dumps.html

What's more, part of that ExamBoosts 350-401 dumps now are free: https://drive.google.com/open?id=1CS9MYLluwV4Ku1KIMxOOmqYUEv12Tgoc

Report this page